Thursday, March 20, 2014

Safety instructions axe hand when chopping wood

Cut wood becomes more common with wood burning stoves are gaining popularity as well as for camping - but how safe you perform this task? Simple task of cutting logs can be potentially fatal if you follow a few simple guidelines when using a hand ax for chopping wood.

First, keep an ax in the hands of the sheath above the ax blade when not in use. Covering the same ax ax blade and protects any person who may be damaged by sharp ax. Before using a hand ax wood handle or stalk check for nicks or cracks. Also, make sure that the blade is attached to the stalk and not wiggle at the end of the stalk. If the blade is not firmly attached to the stalk as possible for the blade to fly while you are working on it.

For maximum protection it is essential to have the appropriate personal protective equipment such as a set of safety glasses and safety shoes when cutting wood. Able flakes fly in the direction of safety glasses are required. Even the smallest piece of wood that comes in contact with the eyes can cause major damage. Using wood Collapse possibility spoonful or loss targets while clipping toe shoes ax steel survival would recommend.

Remember to have a solid and stable surface when cutting wood. Do not use an ax to try to cut a log lean flat surfaces. Spring can log off to one side but the ax may continue to fall at the feet or legs may be. The ax may continue to fall hitting a rock that can dull the blade. To maintain a stable surface is important to keep it clean and free of dirt strapping your area. When you finish cutting the log pile next to pieces before you start again with a new logging

It is important that you cut logs with a hand ax less than three inches thick and contains no ingredients in it like an old nail or spike. Other items embedded in the wood logs can throw in the air while cutting wood and could injure you or others in the process. The general rule is if you log wood with metal in it throw it not worth the trouble of flying metal can cause some sticks.

Your attitude is very cut. When cutting wood with an ax is important to use both hands to keep control of the ax. Plant your feet firmly on the ground, a few inches apart to balance your body weight. You have to stand right in front of the platform logging right in the middle of the line of view. Must be balanced to deliver the most power per stroke and be prepared to deal with situations that may arise when cutting wood.

Now that you have made the necessary preparations you are ready to cut wood. Raise your hand ax with both hands firmly gripping the stalk in the middle of the agenda of the log. Your goal is to hit the wood directly to the center. Pressing on the side or front of the wood can cause a glancing blow can result in injury. Put all your energy behind the ax and delivered blow. If you do not violate the wooden ax half with the first hit, hit the ax is now embedded in the log on the platform to make his way down the grain and split logs into two parts.

Please visit PR6 Home Improvement advertise to get more information.